12V 16.7A 200W Waterproof Power Supply

This IP68 waterproof power supply provides 16.7amp, 200W max, 12V DC power. It works great as a 12V 16.7a power supply, a highly reliable constant voltage power source for 12V LED strip lights and other LED lights in indoor and outdoor applications. In addition to the high efficiency up to 85%, its metal enclosure greatly enhances heat dissipation, together with optimal design of natural air convection, enabling the DM-12V 200W to work on full load in the temperature range -40~+90°C. DM-12V 200W has complete protection functions, providing a reliable solution for various residential and commercial applications.

LED Waterproof Power Supply 200W  (C&V)
1.  Protections: short circuit/overload/over voltage/over temperature
2.  IP68 design for indoor or outdoor installation
3.  It can be used in dry,wet, and rainy environments Cooling by free air, high reliability
4.  100% full load burn-in test
5.  Suitable for internal light application for Ⅰ/Ⅱ/Ⅲ. Widely used in LED lighting and IT equipment
6.  IS 15885(Part2/Sec13)
7.  Compliance with worldwide safety regulations for led lighting.
OUTPUT  Output voltage  12V DC  24V DC
  Output voltage range  12VDC±0.5VDC  24VDC±0.5VDC
  Output Current  Max 16.7A  Max 8.3A
  Output power  Max 200W
  Output power range  0~200W
  Ripple & Noise  ≤120mV  ≤240mV
  Linear Regulation  ±1%
  Load Regulation  ±1%
  Start-up Time (Typ)  500ms/230VAC
  Hold Up Time(Typ)  190ms/230VAC
INPUT  Input voltage  200-240Vac
  Frequency  50/60Hz
  Input сurrent  1.76A/230Vac
  Power factor  PF>0.6
  No-load power consumption  <3W
  Efficiency (typ.)  89%  90%
  Inrush current(typ.)  Cold start 60A at 230Vac
  Control surge capability  L,N:2KV L,N-PE:4KV
  Leakage сurrent  Max. 0.5mA
ENVIRONMENT  Working temperature  ta: -30°C~ 50°C tc: 80°C
  Working humidity  20 ~ 99%RH, condensing (Waterproof)
  Storage temp., humidity  -40°C ~ 80°C, 10~95%RH
PROTECTION  Overtemperature  Protection type: Turn off the output voltage, after the temperature drops, re-energize to restore.
  Over load protection  Shut down the output when current load above 110%~150%, auto recovers.
  Short circuit protection  Protection type: It can be automatically restored after the fault is eliminated.
SAFETY&EMC  Withstand voltage  I/P-O/P:3750Vac
  Isolation resistance  I/P-O/P: 100MΩ/500VDC/25°C/70%RH
  Safety standards  IEC/EN61347;IEC/EN60950;IP67
  EMC Test Standards  EN55015: 2013;EN61547: 2009; EN61000-3-2:2014; EN61000-3-3:2013
Reliabilityand Quality Control  Impact aging  100% of the product is fully loaded and impacted for 4 hours under an environment of at least 40°C±5°C
  Component derating  Under the steady-state conditions of rated input and output, the stress of components will not exceed its maximum nominal value
NOTE1.All parameters not specifically mentioned are measured at 230VAC input, rated load and 25°C ambient temperature.
2.Ripple and noise test method: connect 0.1uF and 47uF capacitors in parallel at the terminal, and measure under 20MHZ bandwidth.
3.Ensure that the power supply is used under the rated parameters and environment.

With more than 18 years of manufacturing and exporting experience in switching power supplies, MIJI can provide import guides and professional reports for purchasing and product suggestions for your market! Contact us for free samples.